US
1-800-821-7563
International
1-877-821-7575
Para ver en Español
Follow us
on
Fork Information Listing of forks available Lifting Fork Specifications Fork Inquiry Form
Special Application Forks
Bucket Forks Skid Steer Pallet Forks Loader Pallet Forks Telehandler Pallet Forks
All of AMH's forks for Clark® forklifts & equipment*
are made
from High Carbon Steel for extra strength and safety!
|
Thickness |
Class |
|
125 = 1 1/4 |
2 = II (16" hook mount) |
| 150 = 1/1/2 | 3 = III (20" hook mount) |
| 175 = 1 3/4 | 4 = IV (25" hook mount) |
| 250 = 2 1/2 | |
| FTP indicates fork is fully tapered and top polished | |
|
STD Taper or Pallet fork: The most popular of all tapers used in picking up skids or pallets. Normally, tapers begin 16" to 24" from tip and end with a 3/8" tip. |
|
|
Full Taper: Taper begins at heel of fork and extends to tip, ending with 3/8" tip. Can be polished or not. Good for getting under plywood or cardboard boxes. |
|
|
Full Taper Polish and Chisel Point: Same as Full Taper but has 1/8" tip. Mainly used in plywood applications. |
|
(The following table of forklift part numbers & capacity ratings may take up to 30 seconds to load with a 28.8K modem.)
| Please Note: All forklift forks are sold in PAIRS unless otherwise stated! | |||||||
|
PART NUMBER |
THICKNESS |
WIDTH |
LENGTH |
CLASS |
TAPER |
SHIPPING WT/PR |
CAPACITY (LBS) @24"L.C. (PR) |
|
1-3-36-B30 |
1" |
3" |
36" |
30" BH |
STD |
105 |
1500 |
|
125-4-36-2 |
1.25" |
4" |
II |
152 |
3000 |
||
|
125-4-42-2 |
42" |
168 |
|||||
|
125-4-48-2 |
48" |
186 |
|||||
|
150-3-42-B48 |
1.5" |
3" |
42" |
48" BH |
206 |
3500 |
|
|
150-4-36-2 |
4" |
36" |
II |
172 |
4300 |
||
|
150-4-42-2 |
42" |
194 |
|||||
|
150-4-42-2FTP |
FTP |
176 |
3870 |
||||
|
150-4-42-B48 |
48" BH |
STD |
260 |
4300 |
|||
|
150-4-48-2 |
48" |
II |
214 |
||||
|
150-4-48-2FTP |
FTP |
192 |
3870 |
||||
|
150-4-48-B |
22" BH |
STD |
214 |
4300 |
|||
|
150-4-48-B48 |
48" BH |
323 |
|||||
|
150-4-54-2 |
54" |
II |
222 |
||||
|
150-5-42-2 |
5" |
42" |
240 |
6000 |
|||
|
150-5-42-2FTP |
FTP |
216 |
5400 |
||||
|
150-5-48-2 |
48" |
STD |
266 |
6000 |
|||
|
150-5-48-2FTP |
FTP |
230 |
5400 |
||||
|
150-5-54-2 |
54" |
STD |
292 |
6000 |
|||
|
150-5-60-2 |
60" |
318 |
|||||
|
150-5-72-2 |
72" |
370 |
|||||
|
150-6-42-3FTP |
6" |
42" |
III |
FTP |
282 |
||
|
150-6-48-3FTP |
48" |
302 |
|||||
|
150-7-42-3FTP |
7" |
42" |
326 |
7500 |
|||
|
150-7-48-3FTP |
48" |
350 |
|||||
|
150-8-48-3FTP |
8" |
396 |
9000 |
||||
|
175-4-36-2 |
1.75" |
4" |
36" |
II |
STD |
192 |
6000 |
|
175-4-42-2 |
42" |
216 |
|||||
|
175-4-42-2FTP |
FTP |
202 |
5400 |
||||
|
175-4-48-2 |
48" |
STD |
240 |
6000 |
|||
|
175-4-48-2FTP |
FTP |
216 |
5400 |
||||
|
175-4-48-B48 |
48" BH |
STD |
339 |
6000 |
|||
|
175-4-48-B55 |
55" BH |
367 |
|||||
|
175-4-54-2 |
54" |
II |
264 |
||||
|
175-4-54-2FTP |
FTP |
230 |
5400 |
||||
|
175-4-60-2 |
60" |
STD |
288 |
6000 |
|||
|
175-4-72-2 |
72" |
336 |
|||||
|
175-5-36-2 |
5" |
36" |
240 |
8000 |
|||
|
175-5-42-2 |
42" |
270 |
|||||
|
175-5-42-2FTP |
FTP |
248 |
7200 |
||||
|
175-5-42-3 |
III |
STD |
302 |
8000 |
|||
|
175-5-48-2 |
48" |
II |
300 |
||||
|
175-5-48-2FTP |
FTP |
266 |
7200 |
||||
|
175-5-48-3 |
III |
STD |
325 |
8000 |
|||
|
175-5-48-3FTP |
FTP |
290 |
7200 |
||||
|
175-5-54-2 |
54" |
II |
STD |
330 |
8000 |
||
|
175-5-54-2FTP |
FTP |
280 |
7200 |
||||
|
175-5-54-3FTP |
III |
312 |
|||||
|
175-5-60-2 |
60" |
II |
STD |
360 |
8000 |
||
|
175-5-60-2FTP |
FTP |
298 |
7200 |
||||
|
175-5-60-3 |
III |
STD |
394 |
8000 |
|||
|
175-5-60-3FTP |
FTP |
332 |
7200 |
||||
|
175-5-72-2 |
72" |
II |
STD |
420 |
8000 |
||
|
175-5-72-3 |
III |
440 |
|||||
|
175-7-48-3FTP |
7" |
48" |
FTP |
402 |
10000 |
||
|
175-7-54-3FTP |
54" |
424 |
|||||
|
175-7-60-3FTP |
60" |
448 |
|||||
|
2-150-42-2 |
2" |
1.5" |
42" |
II |
10" |
57 / EA |
1450 / EA |
|
2-150-42-3 |
III |
63 / EA |
|||||
|
2-150-48-2 |
48" |
II |
62 / EA |
||||
|
2-150-48-3 |
III |
69 / EA |
|||||
|
2-150-48-B33 |
33" BH |
62 / EA |
|||||
|
2-2-42-2 |
2" |
42" |
II |
75 / EA |
1950 / EA |
||
|
2-2-42-3 |
III |
82 / EA |
|||||
|
2-2-48-2 |
48" |
II |
81 / EA |
||||
|
2-2-48-3 |
III |
88 / EA |
|||||
|
2-2-48-4 |
IV |
96 / EA |
|||||
|
2-2-48-B33 |
33" BH |
92 / EA |
|||||
|
2-4-48-2 |
4" |
II |
STD |
262 |
8000 |
||
|
2-4-48-B |
30" BH |
272 |
|||||
|
2-4-48-B66 |
66" BH |
440 |
|||||
|
2-4-60-B |
60" |
325 |
|||||
|
2-4-60-B66 |
489 |
||||||
|
2-4-96-B |
96" |
26" BH |
516 |
||||
|
2-5-42-3 |
5" |
42" |
III |
332 |
10000 |
||
|
2-5-48-3 |
48" |
366 |
|||||
|
2-5-48-3FTP |
FTP |
330 |
9000 |
||||
|
2-5-48-B74 |
74" BH |
STD |
616 |
10000 |
|||
|
2-5-54-3 |
54" |
III |
400 |
||||
|
2-5-60-3 |
60" |
434 |
|||||
|
2-5-72-3 |
72" |
502 |
|||||
|
2-5-72-B74 |
74" BH |
752 |
|||||
|
2-5-84-B |
84" |
26" BH |
546 |
||||
|
2-5-96-B |
96" |
26" BH |
612 |
||||
|
2-6-42-3 |
6" |
42" |
III |
394 |
13000 |
||
|
2-6-48-3 |
6" |
48" |
436 |
||||
|
2-6-48-3FTP |
FTP |
388 |
11700 |
||||
|
2-6-54-3 |
54" |
STD |
478 |
13000 |
|||
|
2-6-60-3 |
60" |
520 |
|||||
|
2-6-72-3 |
72" |
602 |
|||||
|
2-6-84-B |
84" |
26" BH |
646 |
||||
|
2-6-96-B |
96" |
26" BH |
726 |
||||
|
250-6-48-3 |
2.5" |
48" |
III |
540 |
21000 |
||
|
250-6-48-4 |
IV |
600 |
|||||
|
250-6-48-B |
40" BH |
618 |
|||||
|
250-6-60-4 |
60" |
IV |
702 |
||||
|
250-6-60-B |
40" BH |
720 |
|||||
|
250-6-60-B74 |
74" BH |
720 |
|||||
|
250-6-72-4 |
72" |
IV |
1093 |
||||
|
250-6-72-B |
40" BH |
822 |
|||||
|
250-6-84-B |
84" |
958 |
|||||
|
250-6-96-B |
96" |
990 |
|||||
|
250-8-60-B |
8" |
60" |
959 |
28000 |
|||
|
250-8-72-B |
72" |
1095 |
|||||
|
250-8-72-B85 |
85" BH |
1605 |
|||||
|
250-8-96-B |
96" |
40" BH |
1422 |
||||
|
3-8-96-B |
3" |
1616 |
43000 |
||||
* All trademarks are the property of their respective companies and are in no way connected to Arrow Material Handling.
ARROW MATERIAL HANDLING (AMH) has been a market innovator in the material handling industry for 40 years. AMH manufactures and distributes high quality forks and attachments at competitive prices for all makes and models of construction equipment and forklift trucks, both foreign and domestic. Our dealers rely on us time and again because of our expert sales and engineering staff, our time proven product quality and after the sale support, and our fast delivery time for both stock and custom fabrication orders from one of our three distribution centers in Kansas City, Missouri - Chesapeake, Virginia - or Commerce, California.
ARROW MATERIAL HANDLING'S complete line of attachments includes ITA & Pin-On forks, fork spreaders, hydraulic fork positioners, fork mounted work platforms, carpet rams, universal trailer spotters, and carriages for all makes & sizes of forklifts; pallet fork and frame assemblies, bucket mounted forks, utility and material buckets, grapple buckets and rakes, tree and post pulling grapples, hydraulic tree shears, PTO and hitch adapters, universal trailer spotters, fork mounted work platforms, truss booms, extension booms, and jib booms for all makes of skid steers, wheel loaders, backhoes, telehandlers, rough terrain and high reach forklifts. Each of our frame assemblies features the world famous AMH High Carbon Steel forklift forks. The combination is unbeatable.
AMH brand forks and attachments are available throughout the United States and Canada via our network of more than 10,000 material handling equipment, construction equipment and agricultural equipment dealers, and rental companies. If you are an end user in the United States looking for AMH brand attachments, check the dealer locator available on this website to find a dealer near you, or contact your preferred local equipment dealer or rental company and ask them about AMH forks and attachments. End users in Canada and worldwide should contact their preferred local equipment dealer or rental company.
AMH is currently expanding around the globe. AMH forks and attachments are available worldwide through select distributors and dealers. For more information on partnership opportunities available, please call our international toll free number at 1-877-821-7575 ~ press extension 415 for English, or extension 353 for Spanish.
ARROW MATERIAL HANDLING PRODUCTS makes buying easy. We accept Visa, MasterCard, American Express or Check-By-Phone(ACH). Qualified dealers may also buy on open account. It takes only a few minutes to fill out our online credit application.
Looking for alternative commercial financing?
